Effects of Nd:YAG laser irradiation at different energy densities on dentin bond durability under simulated pulpal pressure.

OBJECTIVES: To evaluate the effects of Nd:YAG laser irradiation on the microstructures of dentin surfaces and the long-term bond strength of dentin under simulated pulpal pressure. MATERIALS AND METHODS: Under simulated pulp pressure, 30 freshly extracted caries-free third molars were cut into 2-mm-thick dentin samples and then divided into five groups: the control and laser groups (93.3 J/cm2; 124.4 J/cm2; 155.5 J/cm2; 186.6 J/cm2). Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and Vickers hardness were used to analyze the surface morphology, composition, and mechanical properties of the dentin before and after laser irradiation. Another 80 caries-free third molars were removed and treated as described above, and the resin was bonded to the dentin surface with Single Bond Universal (SBU) adhesive in self-etch mode to make stick specimens. Microtensile bond strength (µTBS), confocal laser scanning microscopy (CLSM), and interfacial silver nanoleakage tests before and after 10,000 times thermocycling were then performed to analyze the bonding properties and interfacial durability of each group. RESULTS: SEM observations revealed that the surfaces of all laser group specimens were rough with open dentin tubules. Laser irradiation altered the surface composition of dentin while removing some collagen fibers but did not affect its surface hardness or crystallographic characteristics. Furthermore, laser irradiation with an energy density of 124.4 J/cm2 significantly promoted the immediate and aging bond strengths and reduced nanoleakage compared to those of the control group. CONCLUSIONS: Under simulated pulp pressure, Nd:YAG laser pretreatment altered the chemical composition of dentin and improved the immediate and long-term bond strength. CLINICAL RELEVANCE: This study investigated the optimal parameters for Nd:YAG laser pretreatment of dentin, which has potential as a clinical method to strengthen bonding.

Investigation of laser wavelength effect on the ablation of enamel and dentin using femtosecond laser pulses.

We investigated the effect of femtosecond (fs) laser ablation of enamel and dentin for different pulse wavelengths: infrared (1030 nm), green (515 nm), and ultra-violet (343 nm) and for different pulse separations to determine the optimal irradiation conditions for the precise removal of dental hard tissues with the absence of structural and compositional damage. The ablation rates and efficiencies were established for all three laser wavelengths for both enamel and dentin at room temperature without using any irrigation or cooling system, and the surfaces were assessed with optical and scanning electron microscopy, optical profilometry, and Raman spectroscopy. We demonstrated that 515 nm fs irradiation provides the highest rate and efficiency for ablation, followed by infrared. Finally, we explored the temperature variations inside the dental pulp during the laser procedures for all three wavelengths and showed that the maximum increase at the optimum conditions for both infrared and green irradiations was 5.5 °C, within the acceptable limit of temperature increase during conventional dental treatments. Ultra-violet irradiation significantly increased the internal temperature of the teeth, well above the acceptable limit, and caused severe damage to tooth structures. Thus, ultra-violet is not a compatible laser wavelength for femtosecond teeth ablation.

Chemical and morphological analysis of dentin irradiated by different high-power lasers: a systematic review.

PURPOSE: This systematic review provides an overview of the main chemical and morphological alterations generated on dentin by different high-power lasers' irradiation. METHODS: The review was registered in PROSPERO (CRD42023394164) and PRISMA guidelines were followed. The search strategy was conducted on MEDLINE (PubMed), Embase (Elsevier), and Web of Science (Clarivate) databases. The eligibility criteria were established according to the PICOS strategy, focusing on in vitro and ex vivo studies that assessed the chemical and morphological changes in dentin using five high-power lasers: Nd:YAG (1064 nm), Er:YAG (2940 nm), Er, Cr:YSGG (2780 nm), diode (980 nm), and CO2 (10,600 nm). Publication range was from 2010 to 2022. Data was summarized in tables and risk of bias was assessed by QUIN tool. RESULTS: The search resulted in 2255 matches and 57 studies composed the sample. The methods most used to assess the outcomes were scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and Raman. The studies presented "medium" and "low" risk of bias. The laser prevalently identified was the Er:YAG laser, associated with dentin ablation, absence of smear layer, and exposed tubules. The Nd:YAG laser generated vitreous surface and thermal damage, such as carbonization and cracks. The other lasers caused an irregular surface and no adverse thermal effects. Regarding the chemical structure, only the Er,Cr:YSGG laser caused collagen matrix reduction. The effects found were more intense with higher dosimetry. CONCLUSION: Evidence available indicates that the irradiation of dentin with high-power lasers are related to morphological outcomes favorable to adhesive restorative procedures, with minimal changes in collagen matrix and mineral content. However, those observations should be carried carefully by clinicians and more clinical trials regarding the association of high-power laser irradiation and restorative procedure longevity are needed.

Effect of various Er:YAG laser conditioning energies on dentin surface: micromorphological investigation and dentin-resin shear bond strength test.

The aim of this study is to assess the influence of various Er:YAG laser energies on dentin surface micromorphology and dentine-resin shear bond strength (SBS). Eighty dentin specimens were prepared and divided randomly into ten groups: control group (CG), phosphoric acid-etched group (AG), four laser-conditioned groups treated with various pulse energies of 40, 60, 80, and 100 mJ (L40, L60, L80, L100), and four laser-conditioned acid-etched groups (LA40, LA60, LA80, LA100). Two specimens from each group underwent scanning electron microscopy examination, while the remaining six were subjected to the dentin-resin SBS test. Statistical analyses included Welch's analysis of variance (ANOVA), followed by post hoc Tamhane's T2 multiple comparisons test, Pearson's correlation, and Fisher's exact test. Pulse energies of 60, 80, and 100 mJ fully exposed the dentin tubule orifices, although 100 mJ lead to microcracks. Laser-conditioned surfaces exhibited smaller tubule diameters compared to acid-etched surfaces, and tubule diameters positively correlated with dentin-resin SBS. Laser-conditioned groups showed lower SBS values, while laser-conditioned acid-etched groups demonstrated higher SBS values. No significant relationship was observed between dentin surface roughness and SBS. The range of laser energies used for dentin conditioning had limited effects on SBS or failure modes. Laser conditioning with energies ranging from 40 to 100 mJ effectively removes the smear layer from the dentin surface. However, to enhance dentin-resin bond strength, further acid etching of the laser-conditioned surface is necessary.

The combined treatment of fiber post and root canal by the Er:YAG laser enhances the bond strength of composite reconstruction.

Fiber post bonding failure remains an issue during crown restoration procedures. This experiment examines the bonding effect of combined Er:YAG laser treatment on both root canal and fiber post. Sixty extracted mandibular first premolars were randomly selected and divided into 6 groups (n = 10 per group): G1 (control group): root canal with 2.5% NaClO treatment, no treatment of fiber post; G2: root canal with 2.5% NaClO treatment and fiber post with airborne-particle abrasion; G3: root canal with Er:YAG laser treatment and fiber post with airborne-particle abrasion; G4: root canal with Er:YAG laser treatment, no treatment of fiber post; G5: root canal with 2.5% NaClO treatment, fiber post with Er:YAG laser irradiation; G6: combined Er:YAG laser irradiation of both root canal and fiber post. An Er:YAG laser with a wavelength of 2940 nm was used to treat the fiber post (4.5 W, 450 mJ, 10 Hz for 60 s at 100-µs pulse duration with 100% water cooling) and the root canal (1.5 W, 150 mJ, 10 Hz for 60 s at 100-µs pulse duration with 100% water cooling). When the root canal was treated with the laser, the fiber tip was inserted into the root canal to make a spiral reciprocating motion. Bond strength was analyzed by a micro push-out test. Data were analyzed using both the Tukey test and two-way ANOVA (α = 0.05). Failure modes were observed and counted through a stereo microscope. The root canal and fiber post surface analysis was performed using SEM. The bond strength of G3 and G6 were significantly enhanced compared to those of the other groups (p < 0.05). The SEM analysis showed that the smear layers of groups with root canals subjected to Er:YAG laser irradiation were significantly reduced compared to those of the control group (G1). In groups with fiber posts treated with Er:YAG laser irradiation, the surfaces of the fiber posts exhibited greater surface roughness and a certain degree of epoxy matrix removal. Through the combined Er:YAG laser irradiation of both root canal and fiber post, the bond strength between them was significantly enhanced, which was superior to the individual treatment of either fiber posts or root canal.

The effect of combination treatment of CO2-laser irradiation and tetracalcium phosphate/dicalcium phosphate anhydrate on dentinal tubules blockage: an in vitro study.

The aim of this study was the evaluation of the in vitro efficacy of a carbon dioxide (CO2) laser, a tetracalcium phosphate/dicalcium phosphate anhydrate (TP/DP) desensitizer and the combination of the desensitizer and additional CO2 laser irradiation as a treatment modality for cervical dentin hypersensitivity. A total of 48 dental specimens, prepared from extracted human premolars and molars, were divided into four groups: a control group, a TP/DP desensitizer paste group, a CO2 laser (10.600-nm wavelength) group, and a paste and laser group. The specimens were coated with nail varnish except in the marked area and were then immersed in 2% methylene blue dye for 1 h. The specimens were then washed, dried, and cut longitudinally. Thereafter, photos of 40 dentin specimens were taken and evaluated. The area of penetration was assessed and reported as percentage of the dentin surface area. Additionally eight dental specimens were examined with the aid of a scanning electron microscope and evaluated. Significant differences in the penetration depth were found for all experimental groups compared to the control group. The lowest penetration area was detected in the paste-laser group (16.5%), followed by the laser (23.7%), the paste (48.5%), and the control group (86.2%). The combined treatment of the CO2 laser and a TP/DP desensitizer was efficient in sealing the dentinal surface and could be a treatment option for cervical dentin hypersensitivity.

Effects of direct therapeutic radiation on pulpal surface of root dentin: an in vitro study.

The aims of the study were to analyze the effects of therapeutic radiation on human root dentin samples from the aspect of possible alterations in crystallinity, micro-morphology, and composition. Fifty-six root dentin specimens were divided into seven groups (0, 10, 20, 30, 40, 50, and 60 Gy). Scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) analyses were performed on pulpal surfaces of root dentin after being irradiated by 6MV photon energy. Mineral compositions, Ca/P, P/N, Ca/N ratios, and hydroxyapatite pikes were calculated. Some deuteriations on the dentin surface were observed in SEM images after 30 Gy and subsequent doses. One-way ANOVA revealed that there was no significant alteration in weight percentages of C, O, Mg, Ca, P, and N between groups. Radiation did not influence stoichiometric Ca/P, Ca/N, and P/N molar ratios. XRD analysis did not show a remarkable decline in hydroxyapatite pikes by the increasing doses. Radiotherapy changes the micromorphology of circumpulpal dentin but does not affect elemental composition and crystallinity.

Effect of Er: YAG laser irradiation with additional low energy on resin-dentin bonding and morphology of bonded interface.

OBJECTIVES: To examine the micro tensile bond strength (µTBS) and the resin-dentin interface on a laser-irradiated dentin surface using two different irradiation methods, with or without additional low-energy irradiation. METHODS: The flat bovine dentin surface was divided into three groups: i). control group (C group, no irradiation), ii) 80 mJ/pulse Er: YAG laser group (80 group), iii) 80 + 30 mJ/pulse Er: YAG laser group (80 + 30 group, with an additional 30 mJ/pulse). After the roughness of the dentin surface was recorded, Clearfil SE Bond 2 or Clearfil Universal Bond Quick (Kuraray Noritake Dental Inc., Tokyo, Japan) was applied. After the µTBS testing, the failure mode was observed. The bonded interface was assessed using Rhodamine-dye incorporated adhesives and observed by optical coherence tomography. RESULTS: The dentin surface showed opened dentinal tubules without a smear layer after irradiation. For both adhesives, the µTBS was significantly higher in 80 + 30 group than in the 80 group (p < 0.05). In the 80 group, the thickness of the adhesive layer was not uniform, and the dentin surface was occasionally in direct contact with the composite resin. The failure mode images showed that most of the fractures in the 80 group were at the sub-surface of irradiated dentin. The adhesive layers of the 80 + 30 groups were homogeneous. CONCLUSIONS: The dentin surface was rough and irregular by 80 mJ irradiation, which might result in an inadequate resin-dentin interface and the weak µTBS. The bonded integrity was mitigated by additional irradiation.

Dentin disinfection and adhesive bond strength using modified photoactivated carbon nanoparticles.

AIMS: The present study aimed to investigate the bond integrity and disinfection efficacy of Methylene blue(MB) alone, MB-PDT (Photodynamic therapy), MB@ carbon nanoparticles (CP)-PDT, and Cr, Cr: YSGG (ECL) against lactobacilli in Caries-affected dentin (CAD) MATERIAL AND METHODS: Methods consisted of Shear bond strength (SBS), Scanning electron microscopy (SEM), energy dispersive X-ray (EDX), methods of disinfection, and failure analysis. CAD samples were prepared and biofilm formed on the specimens randomly allocated into five groups based on disinfection. Group 1: CHX; Group 2: MB; Group 3: MB-PDT: group 4: MB@CP-PDT and group 5: ECL. After disinfection Colony forming units were measured and specimens were restored and positioned under a universal testing machine (UTM). Failure analysis was performed using a stereomicroscope. The difference in survival rate was assessed using the Kruskal-Walis test. Mean and standard deviation for bond values after different methods of disinfection was evaluated using analysis of variance (ANOVA) and Post Hoc Tukey. The significance level was p<0.05 RESULTS: Morphological analysis revealed that CPs under SEM are flat discs with edged irregular shapes. EDX analyses show a spike indicating carbon particles by more than 95%. MB@CP-PDT displayed the highest reduction in lactobacillus levels in comparison to the other disinfection methods. The highest SBS was exhibited by the CAD sample disinfected with ECL. The lowest SBS values in CAD specimens after cavity cleansing with MB alone. The predominant failure type in CAD disinfected with MB alone, ECL CHX, MB-PDT, and MB@CP-PDT was adhesive. CONCLUSION: The use of MB@CP-PDT showed high antibacterial potency against lactobacillus but demonstrated bond values similar to CHX. Use of Er, Cr: YSGG showed considerable effectiveness against lactobacillus along with the highest bond values.

Effects of Er: YAG, Er,Cr: YSGG, and Nd: YAG laser irradiation and adhesive systems on the immediate and long-term bond strength of dentin: a systematic review and meta-analysis.

At present, lasers are increasingly used in the oral clinical field, and research and applications in dental hard tissue treatment are also increasing. The effect of laser etching dentin on the bonding strength of composite resin reported in the literature is still inconclusive. The purpose of this review was to evaluate whether laser etching can improve the immediate and long-term bonding strength of dentin and investigate the effect of different types of adhesives on the bonding strength of dentin. Two reviewers performed a literature search up from January 2012 to November 2021 in four databases: MEDLINE (PubMed), Web of Science, EMBASE, and the Cochrane Library. A total of 25 studies were included in the meta-analysis. The Cochrane Collaboration Bias Risk Assessment tool was used to evaluate the quality of the included literature, and an analysis was carried out using Review Manager Software version 5.3. The aging bond strength of dentin after erbium (Er): yttrium aluminum garnet (YAG) laser treatment was significantly lower than that of dentin in the bur group (P < 0.00001). At the same time, the bond strength of dentin immediately and aging after (Er), chromium-doped (Cr): yttrium scandium gallium garnet (YSGG) laser treatment was lower than that of dentin in the bur group (P < 0.05). There was no significant difference in the immediate and aging bonding strength among samples in the Er: YAG laser, Er, Cr: YSGG laser, and blank control groups (no laser or bur). The aging bond strength of samples after neodymium-doped (Nd): YAG laser treatment was higher than that of samples in the blank control group (P < 0.05); in addition, the performance of self-etching adhesive was slightly better than that of acid etching adhesive. Regardless of the applied surface treatment and the adhesive employed, dentin after aging showed significant bond degradation (P < 0.05). There was high heterogeneity of bond strength between different groups, and the small number of studies and the contradictory results may be the main reasons for this outcome.

Effects of Er:YAG and Er,Cr:YSGG laser irradiation and adhesive systems on microtensile bond strength of a self-adhering composite.

This study was aimed to evaluate the effects of Er:YAG and Er,Cr:YSGG laser irradiation and adhesive systems on the microtensile bond strength of Fusio Liquid Dentin (FLD) which is a self-adhering composite (SAC). Twenty-four freshly extracted human molar teeth were collected, and the enamel was removed from the occlusal surface to obtain a flat dentin surface. Twenty-four teeth were randomly divided into eight groups: Group 1: only Fusio Liquid Dentin (FLD) (Petron Clinical, Orange, California, USA) was applied to the dentin surface; Group 2: 37% Phosphoricacid (i-GEL, Medicinos Linija UAB, Lithuania) + FLD; Group 3: Single Bond Universal (SBU) (3 M ESPE, Germany) + FLD; Group 4: Adper Easy One (AEO) (3 M ESPE, Germany) + FLD; Group 5: Er:YAG laser + AEO + FLD; Group 6: Er:YAG laser + SBU + FLD; Group 7: Er,Cr:YSGG laser + AEO + FLD; and Group 8: Er,Cr:YSGG laser + SBU + FLD. After thermocycling, 1 × 1 mm2 sticks were used for the µTBS test (n = 10). Two sticks per group were used for SEM analysis. Fractured sample surfaces were evaluated using a stereomicroscope. Group 8 showed the highest µTBS value (13.70 MPa), whereas Group 1 showed the lowest µTBS value (5.60 MPa). There were no significant differences between Groups 2, 3, and 4 (P = 0.324), but Groups 5-8 showed statistically significant results that were higher than Groups 1-4 (P = 0.012). Adhesive failure mode was predominant followed by mixed failure. The evaluation of bonding of the FLD to dentin showed that the combined use of Er:YAG and Er,Cr:YSGG lasers with SBU and AEO on dentin surfaces improved the dentinal bond strength of the FLD.

Efeito de doses terapêuticas de radioterapia sobre a morfologia, composição química e microdureza do esmalte e da dentina de dentes permanentes / Effect of therapeutic doses of radiotherapy on the morphology, chemical composition, and microhardness of enamel and dentin of permanent teeth

Introdução: Padrões atípicos de cárie dentária em pacientes submetidos a radioterapia para o tratamento do câncer de cabeça e pescoço podem estar associados aos efeitos da radiação sobre as glândulas salivares e tecidos dentários duros. Somados, podem contribuir para a cárie relacionada a radiação. Embora haja evidências sobre alterações sofridas pelos tecidos dentários duros após radioterapia, não há consenso na literatura sobre a gravidade destas alterações. Objetivo: avaliar a microestrutura, composição química e microdureza do esmalte e da dentina de dentes permanentes submetidos a doses terapêuticas de radioterapia in vitro. Material e métodos: estudo experimental, qualitativo, quantitativo e semiquantitativo. Foram obtidos fragmentos coronários de 24 terceiros molares. Constituiuse 2 grupos: NIR (controle): formado por fragmentos de dentes não irradiados e IVT (irradiado): formado por fragmentos de dentes irradiados in vitro (2 Gy/dia 5 vezes por semana, totalizando 70 Gy). Os fragmentos foram submetidos a análise da microdureza (n=24), Espectroscopia de Infravermelho com Transformada de Fourier (FTIR) (n=24), análise morfológica através de Microscopia Eletrônica de Varredura (MEV) (n=19) e análise de elementos químicos por Espectroscopia de Dispersão de Energia de Raio X (EDX) (n=19). As análises foram feitas antes e após a irradiação. Os dados foram testados para distribuição normal (teste de Shapiro-Wilk, α = 0,05) e igualdade de variâncias (teste de Levene, α = 0,05), seguido de testes estatísticos paramétricos. Para a comparação das variáveis quantitativas foi aplicado o teste T de Student. Um valor de p <0,05 (5%) foi considerado estatisticamente significativo. Resultados: em relação as propriedades mecânicas observamos redução significativa da microdureza do esmalte e dentina após irradiação (p<0,001). A análise da composição química por FTIR mostrou que no esmalte não houve alteração da razão matriz/mineral (M:M) no grupo irradiado (p<0,821), mas houve redução significativa do teor relativo de carbonato (RCC) após irradiação (p<0,039). Na dentina observamos redução significativa da razão matriz/mineral (M:M) e carbonato/mineral (C:M) no grupo irradiado (p<0,001), enquanto a razão amida I/amida III, não sofreu alteração significativa após irradiação (p<0,536). Na análise de EDX realizadas no esmalte, não observamos variação no conteúdo de cálcio e fósforo após radiação, mas a razão Ca/P mostrou-se significantemente mais elevada no grupo irradiado (p<0,001). Na dentina, não houve alteração do teor de cálcio e fósforo, assim como da razão Ca/P após irradiação (p<0,267). A análise morfológica através de MEV pós irradiação, mostrou que no esmalte a maioria das amostras apresentaram uma alteração das características microestruturais com a presença de microporosidades, perda de padrões regulares das áreas prismáticas e interprismáticas e presença de áreas amorfas. Na dentina observamos manutenção do padrão de dentina peritubular e intertubular, com a presença de túbulos dentinários desobliterados e com a rede de fibras colágenas mais evidente grupo irradiado. Conclusão: as doses terapêuticas de radioterapia provocaram redução da microdureza, alterações na microestrutura e composição química do esmalte e da dentina. Assim, inferimos que doses terapêuticas de radiação exercem um impacto negativo sobre as propriedades mecânicas, químicas e micro-morfológicas dos tecidos dentários duros aumentando a vulnerabilidade destes tecidos à cárie relacionada a radiação.

INTRODUCTION: Atypical patterns of dental caries in patients undergoing radiotherapy to treat head and neck cancer may be associated with the effects of radiation on salivary glands and dental hard tissues. Together, they can contribute to radiation-related caries. Although there is evidence of changes in hard dental tissues after radiotherapy, there is no agreement in the literature on the severity of these changes. PURPOSE: This study aims to evaluate the microstructure, chemical composition, and microhardness of enamel and dentin in permanent teeth subject to therapeutic doses of in vitro radiotherapy. MATERIAL AND METHODS: This is an experimental, qualitative, quantitative, and semi-quantitative study. Coronary fragments were obtained from 24 third molars. Two groups were created: NIR (control), including fragments of non-irradiated teeth, and IVT (irradiated), including fragments of in vitro irradiated teeth (2Gy/day five times a week, totaling 70Gy). The fragments underwent microhardness analysis (n =24), Fourier-transform Infrared Spectroscopy (FTIR) (n=24), morphological analysis by Scanning Electron Microscope (SEM) (n=19), and analysis of chemical elements by Energy-dispersive X-Ray Spectroscopy (EDX) (n=19). The analyses were performed before and after irradiation. Data were tested for normal distribution (ShapiroWilk test, α = 0.05) and equality of variances (Levene test, α = 0.05), followed by parametric statistical tests. The Student's T test was applied to compare the quantitative variables. A pvalue < 0.05 (5%) was considered statistically significant. RESULTS: Concerning the mechanical properties, we observed a significant reduction in enamel and dentin microhardness after irradiation (p<0.001). The analysis of the chemical composition by FTIR showed no change in the mineral/matrix ratio (M:M) in enamel in the irradiated group (p<0.821), but there was a significant reduction in the relative carbonate content (RCC) after irradiation (p<0.039). In dentin, we observed a significant reduction in the mineral/matrix ratio (M:M) and carbonate/mineral ratio (C:M) in the irradiated group (p<0.001). In contrast, the amide I/amide III ratio showed no significant change after irradiation (p<0.536). In the EDX analysis performed on enamel, we did not observe any calcium and phosphorus content variation after radiation. However, the Ca/P ratio was significantly higher in the irradiated group (p<0.001). In dentin, there was no change either in calcium and phosphorus contents or in the Ca/P ratio after irradiation (p<0.267). The morphological analysis through SEM after irradiation showed that there is a loss in the characteristics of the enamel surface of most fragments, with the presence of microporosities, loss of regular patterns of the prismatic and interprismatic areas, and the presence of amorphous areas. In dentin, we observed maintenance of the peritubular and intertubular dentin patterns, with the presence of unobliterated dentinal tubules and with the most evident network of collagen fibers in the irradiated group. CONCLUSION: Therapeutic doses of radiotherapy caused a reduction in microhardness and changes in the microstructure and chemical composition of enamel and dentin. Thus, we conclude that therapeutic doses of radiation have a negative impact on the mechanical, chemical, and micromorphological properties of hard dental tissues, increasing the vulnerability of these tissues to radiation-related caries

Fluoridated Apatite Coating on Human Dentin via Laser-Assisted Pseudo-Biomineralization with the Aid of a Light-Absorbing Molecule.

A simple, area-specific coating technique for fluoridated apatite (FAp) on teeth would be useful in dental applications. Recently, we achieved area-specific FAp coating on a human dentin substrate within 30 min by a laser-assisted biomimetic (LAB) process; pulsed Nd:YAG laser irradiation in a fluoride-containing supersaturated calcium phosphate solution (FCP solution). The LAB-processed, FAp-coated dentin substrate exhibited antibacterial activity against a major oral bacterium, Streptococcus mutans. In the present study, we refined the LAB process with a combination of a dental diode laser and a clinically approved light-absorbing molecule, indocyanine green (ICG). A micron-thick FAp layer was successfully formed on the dentin surface within only 3 min by the refined LAB process, i.e., dental diode laser irradiation in the FCP solution following ICG treatment. The ICG layer precoated on the dentin substrate played a crucial role in inducing rapid pseudo-biomineralization (FAp layer formation) on the dentin surface by absorbing laser light at the solid-liquid interface. In the refined LAB process, the precoated ICG layer was eliminated and replaced with the newly formed FAp layer composed of vertically oriented pillar-like nanocrystals. Cross-sectional ultrastructural analysis revealed a smooth interface between the FAp layer and the dentin substrate. The refined LAB process has potential as a tool for the tooth surface functionalization and hence, is worth further process refinement and in vitro and in vivo studies.

Effect of nanosecond- and microsecond-pulse Er,Cr:YSGG laser ablation on dentin shear bond strength of universal adhesives.

OBJECTIVE: The study aimed to evaluate the bond strength of universal adhesives to dentin after Er,Cr:YSGG laser irradiation with nanosecond-domain and microsecond-domain pulses. METHODS: Eighty extracted caries-free, sound human molars were divided into eight groups. The enamel was removed until the dentin occlusal flat dentin surface was exposed. Etch-and-rinse followed by adhesive was applied to group 1, and a self-etch adhesive was applied to group 2. Er,Cr:YSGG laser (3 mJ, 100 Hz, 100 ns), (3 mJ, 100 Hz, 150 µs), and (20 mJ, 100 Hz, 150 µs) were applied to groups 3-4, 5-6, and 7-8, respectively. The laser preparation was followed by self-etch adhesives or adhesives treatment. When the composite resin had been built up on the samples, the shear bond strength was tested, and the data were statistically analyzed using analysis of variance (ANOVA). RESULTS: Groups prepared with nanosecond-pulse laser showed significantly higher bond strength values than the microsecond-pulse laser groups and self-etch mode group, and the SEM photographs also showed more dentinal tubules and no damage in the ablation area. The shear bond strength of long pulse laser ablated was comparable to that of self-etching system when it was combined with a self-etch adhesive at low energy, but higher energy laser degraded shear bond strength. CONCLUSIONS: The pulse width of Er,Cr:YSGG laser affects the bond strength, nanosecond pulses of laser irradiation without water cooling can enhance bond strength, but microsecond pulses of laser cannot enhance bond strength.

Ultrastructural Analysis of Er:YAG Lased Bovine Dentin Contaminated by Cariogenic Bacteria.

Objective: The purpose of this study is to investigate the crystal structure of bacteria-contaminated bovine dentin after Er:YAG laser irradiation at various energy densities from macroscale, microscale, and nanoscale. Background: Er:YAG laser can change the morphology and chemical components of dentin. Few preliminary researchers investigate the laser effect on crystal in dentin tissue. Methods: Twenty dentin specimens from bovine incisors were cocultured with S. mutans (UA 159) and divided into four groups with diverse Er:YAG laser irradiation energy (0, 6.37, 12.73, 19.11 J/cm2). The ultrastructure of dentin before and after laser irradiation was investigated with nanoanalytical electron microscopy. X-ray diffraction provided the information of lattice parameters in dentin. The morphology of dentin was observed by scanning electron microscopy. High-resolution transmission electron microscope images and selected-area electron diffraction patterns were obtained for characterizing crystal domain size, structure, and microenvironment of dentin. Results: The combination of these methods disclosed that there exist mineralized, demineralized, and remineralized dentin in the bacteria-invaded dentin and can be feasibly recognized using morphological features. Laser treatments influence hydroxyapatite (HAp) crystals in dentin tissue in different ways: needle HAp in mineralized dentin tissue keeps intact with laser irradiation of no higher than 19.11 J/cm2; laser irradiation improves the crystallinity of lamella HAp by domain growth and rearranges its growth orientations. Conclusions: We report an unprecedented presence of remineralization zone consisting of lamella HAp crystals with distinct high-index planes. These findings have broad implications on the role of laser operation in driving biomineralization and shed new insights into a possible relationship between laser irradiation and remineralization.

Influence of violet LED associated or not with peroxide gel on inflammation, mineralization, and collagen fiber maturation in dentin and pulp tissue.

OBJECTIVES: To evaluate the influence of violet LED, associated or not with a 17.5% hydrogen peroxide (HP) bleaching gel, on inflammation, mineralization in pulp tissue, and collagen fiber maturation in dentin and pulp tissue. MATERIALS AND METHODS: The maxillary molars of eighty Wistar rats were distributed into four groups (n = 10): CONT - without treatment; HP - 30 min application of 17.5% HP; LED - 20 min application of violet LED; and HP+LED - application of PH and violet LED. Rats were euthanized and jaws were processed for histologic and immunohistochemical evaluation (IL-17, IL-23, and osteocalcin) and picrosirius red immediately after (T0), and at 7 (T1), 15 (T2), and 30 days (T3) post-treatment, with Wilcoxon, Mann-Whitney, paired T-test, and T-test (α = 0.05). RESULTS: HP and HP+LED presented necrosis and severe inflammatory infiltrate. When compared to CONT group, LED presented severe osteocalcin (OCN) immunostaining in T2 and less immature fibers in T2 and T3. CONCLUSION: The violet LED caused no severe damage to the pulp tissue, increased IL-17 and IL-23 expression in T0 when associated with HP, and had no influence on pulp tissue mineralization, besides accelerating the maturation of collagen fibers of dentin. CLINICAL RELEVANCE: Violet LED therapy induced no inflammation in the pulp tissue of rats and played no role in pulp tissue fibrosis, besides accelerating the maturation of dentin collagen fibers.

The effect of therapeutic radiation on dental enamel and dentin: A systematic review.

OBJECTIVES: The conventional radiotherapy protocol to treat head-and-neck cancer is usually followed by tooth-decay onset. Radiation impact on mineralized tooth structures is not well-understood. This systematic review aimed to collect the recorded effects of therapeutic radiation on tooth chemical, structural and mechanical properties, in relation with their means of investigation. DATA: Systematic search (January 01 2012 - September 30 2021) terms were "Radiotherapy", "Radiation effects", "Dental enamel", "Dentin", "Human" and "Radiotherapy" NOT "Laser". SOURCES: PubMed, DOSS and Embase databases were searched. STUDY SELECTION: Selected studies compared dental enamel, coronal and root dentin properties before and after in vitro or in vivo irradiation up to 80 Gy. RESULTS: The systematic search identified 353 different articles, with 28 satisfying inclusion criteria. Their reference lists provided two more. Twenty-two studies evaluated dental enamel evolution, nine assessed coronal dentin and eight concerned root dentin. Coronal and root dentin results indicate a major impact of the radiation on their organic matrix. Dental enamel's chemical properties are less modified. Enamel and root dentin's hardness are decreased by therapeutic radiation, but no consensus arises for coronal dentin. CONCLUSIONS: Our findings revealed some interesting information about enzymatic degradation mechanisms of dentin organic matrix and highlighted that dental hard-tissue characterization requires highly specific expertise in materials science. That scientific knowledge is necessary to design suitable protocols, adequately analyze the obtained data, and, thus, provide relevant conclusions. CLINICAL SIGNIFICANCE STATEMENT: Better knowledge and understanding of the mechanisms involved in the degradation of enamel and dentin would enable development of new preventive and therapeutic methods for improved medical care of patients undergoing radiotherapy.

Chemical analysis of irradiated root dentin and its interaction with resin cements.

OBJECTIVES: To investigate the chemical changes in root dentin submitted to ionizing radiation and how it affects the interaction with resin cements. MATERIALS AND METHODS: Forty human premolars were randomly divided into two groups (n = 20): non-irradiated and irradiated. They were randomly subdivided according to the type of resin cement (n = 10): conventional (RelyX ARC, 3 M ESPE) or self-adhesive (RelyX U200, 3 M ESPE). After cementation of the fiberglass posts, the roots were sectioned to be analyzed by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and confocal laser scanning microscopy (CLSM). The data obtained from FTIR and Raman were analyzed using two-way ANOVA followed Tukey's test (α = 0.05). For CLSM, a descriptive analysis was performed. RESULTS: In the FTIR, there was a significant difference between the non-irradiated and irradiated groups for phosphate (p = 0.011), carbonate (p < 0.001), amide III (p = 0.038), and carbonate/mineral ratio (p < 0.001). Regarding the root third, there was a difference for amide I (p = 0.002), mineral/matrix ratio (p = 0.001), and amide I/CH2 (p = 0.026) between the cervical and the others. Raman spectroscopy revealed no difference between groups for 961/1458 cm-1 in the diffusion zone. CLSM showed a different interaction pattern for the two cements with the irradiated dentin from the cervical third. CONCLUSIONS: Ionizing radiation altered the chemical composition of root dentin, especially in the cervical third. The resin cements showed less interaction with the irradiated root dentin. CLINICAL RELEVANCE: As radiotherapy alters the chemical composition of root dentin, the interaction of resin cement with dentin can compromise the success of rehabilitation with fiberglass posts.

Effect of Nd:YAG laser irradiation, used as a desensitizing strategy, on bond strength to simulated hypersensitive dentin.

OBJECTIVES: To evaluate the effect of Nd:YAG laser irradiation as a prior desensitizing strategy on immediate and medium-term microtensile bond strength (µTBS) to simulated hypersensitive dentin. MATERIALS AND METHODS: Flat mid-coronal dentin was obtained from third molars and submitted to a 600-grit SiC paper (1 min; N: normal dentin) or subsequently challenged with citric acid (6%, 1 min; H: simulated hypersensitive dentin). Afterwards, dentin was or was not (C: control; HC, NC - each n = 7) irradiated with Nd:YAG laser (L: laser; 1.0 W/10 Hz/100 mJ/4 irradiations of 50-60 s; HL, NL - each n = 7). A 2-step self-etch adhesive (Clearfil SE Bond) was applied and composite (Filtek Z350) buildups were constructed. After 24-h (distilled water/37 °C) storage, specimens were sectioned into beams and tested (µTBS; 0.5 mm/min) immediately or after 6-month aging. Three-way ANOVA and Tukey tests were applied (α = 0.05). Qualitative evaluation of the adhesive interface (n = 1 extra tooth per group) was performed by Confocal Laser Scanning Microscopy. RESULTS: Substrate condition (p < 0.001), laser irradiation (p < 0.001), and aging (p = 0.002) influenced the results. Furthermore, there was interaction between substrate and irradiation (p < 0.001). Laser irradiation favored µTBS exclusively to hypersensitive dentin immediately and after aging. µTBS to hypersensitive dentin was higher than that to the normal substrate only when it was laser-irradiated. In any case, immediate µTBS was always higher than that after aging. CLSM revealed longer and more numerous resin tags for simulated hypersensitive dentin, and shorter and fewer resin tags for laser-irradiated dentin. No differences were observed in the hybrid layer itself. CONCLUSION: Nd:YAG laser irradiation prior to restoration favored the µTBS of a self-etch adhesive and resin composite to hypersensitive dentin. CLINICAL RELEVANCE: Desensitizing strategies are usually tried before performing restorative treatments in hypersensitive dentin; therefore, they may influence behavior of the adhesive interface established. However, instead of causing concern, Nd:YAG laser irradiation revealed a favorable effect on the aforementioned interface.

Dentinal tubule blockage using nanobioglass in the presence of diode (980 nm) and Nd:YAG lasers: an in vitro study.

OBJECTIVES: The main objective of this study was to enhance the blockage of dentinal tubules using nanobioglass in the presence of diode (980 nm) and Nd:YAG lasers in order to reduce permeability and dentin hypersensitivity. MATERIALS AND METHODS: Thirty-six dentinal samples were randomly divided into 6 subgroups (n = 6): (A) control, (B) diode laser (980 nm, 3-W), (C) Nd:YAG laser (1064, 1.0-W), (D) nanobioglass, (E) nanobioglass + diode laser (980 nm), (F) nanobioglass + Nd:YAG laser. The average number of open dentinal tubules was qualitatively and quantitatively evaluated by scanning electron microscopy (SEM). Data were evaluated by SPSS software version 22, Kruskal-Wallis test, and Mann-Whitney tests with Bonferoni's correction (α = 0.008). RESULTS: Based on the results of Mann-Whitney test, there was a significant difference in the mean number of open dentinal tubules between the control group and the other groups (p < 0.008). However, the difference among the other groups was not statistically significant (p > 0.008). CONCLUSIONS: Findings of this study showed that high-power laser radiation, such as Nd:YAG and diode (980 nm) alone or with nanobioglass, has a significant effect on the blockage of dentinal tubules. CLINICAL RELEVANCE: Introduction of non-invasive methods with long-term and lasting effect on reducing pain and discomfort caused by dentin hypersensitivity.